Next: , Previous: , Up: Arithmetic   [Contents][Index]


17.5 Utility Functions

: ceil (x)

Return the smallest integer not less than x.

This is equivalent to rounding towards positive infinity.

If x is complex, return ceil (real (x)) + ceil (imag (x)) * I.

ceil ([-2.7, 2.7])
    ⇒ -2    3

See also: floor, round, fix.

: fix (x)

Truncate fractional portion of x and return the integer portion.

This is equivalent to rounding towards zero. If x is complex, return fix (real (x)) + fix (imag (x)) * I.

fix ([-2.7, 2.7])
   ⇒ -2    2

See also: ceil, floor, round.

: floor (x)

Return the largest integer not greater than x.

This is equivalent to rounding towards negative infinity. If x is complex, return floor (real (x)) + floor (imag (x)) * I.

floor ([-2.7, 2.7])
     ⇒ -3    2

See also: ceil, round, fix.

: round (x)

Return the integer nearest to x.

If x is complex, return round (real (x)) + round (imag (x)) * I. If there are two nearest integers, return the one further away from zero.

round ([-2.7, 2.7])
     ⇒ -3    3

See also: ceil, floor, fix, roundb.

: roundb (x)

Return the integer nearest to x. If there are two nearest integers, return the even one (banker’s rounding).

If x is complex, return roundb (real (x)) + roundb (imag (x)) * I.

See also: round.

: max (x)
: max (x, [], dim)
: [w, iw] = max (x)
: max (x, y)

Find maximum values in the array x.

For a vector argument, return the maximum value. For a matrix argument, return a row vector with the maximum value of each column. For a multi-dimensional array, max operates along the first non-singleton dimension.

If the optional third argument dim is present then operate along this dimension. In this case the second argument is ignored and should be set to the empty matrix.

For two inputs (x and y), return the pairwise maximum according to the rules for Broadcasting.

Thus,

max (max (x))

returns the largest element of the 2-D matrix x, and

max (2:5, pi)
    ⇒  3.1416  3.1416  4.0000  5.0000

compares each element of the range 2:5 with pi, and returns a row vector of the maximum values.

For complex arguments, the magnitude of the elements are used for comparison. If the magnitudes are identical, then the results are ordered by phase angle in the range (-pi, pi]. Hence,

max ([-1 i 1 -i])
    ⇒ -1

because all entries have magnitude 1, but -1 has the largest phase angle with value pi.

If called with one input and two output arguments, max also returns the first index of the maximum value(s). Thus,

[x, ix] = max ([1, 3, 5, 2, 5])
    ⇒  x = 5
        ix = 3

See also: min, cummax, cummin.

: min (x)
: min (x, [], dim)
: [w, iw] = min (x)
: min (x, y)

Find minimum values in the array x.

For a vector argument, return the minimum value. For a matrix argument, return a row vector with the minimum value of each column. For a multi-dimensional array, min operates along the first non-singleton dimension.

If the optional third argument dim is present then operate along this dimension. In this case the second argument is ignored and should be set to the empty matrix.

For two inputs (x and y), return the pairwise minimum according to the rules for Broadcasting.

Thus,

min (min (x))

returns the smallest element of the 2-D matrix x, and

min (2:5, pi)
    ⇒  2.0000  3.0000  3.1416  3.1416

compares each element of the range 2:5 with pi, and returns a row vector of the minimum values.

For complex arguments, the magnitude of the elements are used for comparison. If the magnitudes are identical, then the results are ordered by phase angle in the range (-pi, pi]. Hence,

min ([-1 i 1 -i])
    ⇒ -i

because all entries have magnitude 1, but -i has the smallest phase angle with value -pi/2.

If called with one input and two output arguments, min also returns the first index of the minimum value(s). Thus,

[x, ix] = min ([1, 3, 0, 2, 0])
    ⇒  x = 0
        ix = 3

See also: max, cummin, cummax.

: cummax (x)
: cummax (x, dim)
: [w, iw] = cummax (…)

Return the cumulative maximum values along dimension dim.

If dim is unspecified it defaults to column-wise operation. For example:

cummax ([1 3 2 6 4 5])
   ⇒  1  3  3  6  6  6

If called with two output arguments the index of the maximum value is also returned.

[w, iw] = cummax ([1 3 2 6 4 5])
⇒
w =  1  3  3  6  6  6
iw = 1  2  2  4  4  4

See also: cummin, max, min.

: cummin (x)
: cummin (x, dim)
: [w, iw] = cummin (x)

Return the cumulative minimum values along dimension dim.

If dim is unspecified it defaults to column-wise operation. For example:

cummin ([5 4 6 2 3 1])
   ⇒  5  4  4  2  2  1

If called with two output arguments the index of the minimum value is also returned.

[w, iw] = cummin ([5 4 6 2 3 1])
⇒
w =  5  4  4  2  2  1
iw = 1  2  2  4  4  6

See also: cummax, min, max.

: hypot (x, y)
: hypot (x, y, z, …)

Compute the element-by-element square root of the sum of the squares of x and y.

This is equivalent to sqrt (x.^2 + y.^2), but is calculated in a manner that avoids overflows for large values of x or y.

hypot can also be called with more than 2 arguments; in this case, the arguments are accumulated from left to right:

hypot (hypot (x, y), z)
hypot (hypot (hypot (x, y), z), w), etc.
: dx = gradient (m)
: [dx, dy, dz, …] = gradient (m)
: […] = gradient (m, s)
: […] = gradient (m, x, y, z, …)
: […] = gradient (f, x0)
: […] = gradient (f, x0, s)
: […] = gradient (f, x0, x, y, …)

Calculate the gradient of sampled data or a function.

If m is a vector, calculate the one-dimensional gradient of m. If m is a matrix the gradient is calculated for each dimension.

[dx, dy] = gradient (m) calculates the one-dimensional gradient for x and y direction if m is a matrix. Additional return arguments can be use for multi-dimensional matrices.

A constant spacing between two points can be provided by the s parameter. If s is a scalar, it is assumed to be the spacing for all dimensions. Otherwise, separate values of the spacing can be supplied by the x, … arguments. Scalar values specify an equidistant spacing. Vector values for the x, … arguments specify the coordinate for that dimension. The length must match their respective dimension of m.

At boundary points a linear extrapolation is applied. Interior points are calculated with the first approximation of the numerical gradient

y'(i) = 1/(x(i+1)-x(i-1)) * (y(i-1)-y(i+1)).

If the first argument f is a function handle, the gradient of the function at the points in x0 is approximated using central difference. For example, gradient (@cos, 0) approximates the gradient of the cosine function in the point x0 = 0. As with sampled data, the spacing values between the points from which the gradient is estimated can be set via the s or dx, dy, … arguments. By default a spacing of 1 is used.

See also: diff, del2.

: dot (x, y, dim)

Compute the dot product of two vectors.

If x and y are matrices, calculate the dot products along the first non-singleton dimension.

If the optional argument dim is given, calculate the dot products along this dimension.

Implementation Note: This is equivalent to sum (conj (X) .* Y, dim), but avoids forming a temporary array and is faster. When X and Y are column vectors, the result is equivalent to X' * Y. Although, dot is defined for integer arrays, the output may differ from the expected result due to the limited range of integer objects.

See also: cross, divergence.

: cross (x, y)
: cross (x, y, dim)

Compute the vector cross product of two 3-dimensional vectors x and y.

If x and y are matrices, the cross product is applied along the first dimension with three elements.

The optional argument dim forces the cross product to be calculated along the specified dimension.

Example Code:

cross ([1, 1, 0], [0, 1, 1])
  ⇒
       1   -1   1

See also: dot, curl, divergence.

: div = divergence (x, y, z, fx, fy, fz)
: div = divergence (fx, fy, fz)
: div = divergence (x, y, fx, fy)
: div = divergence (fx, fy)

Calculate divergence of a vector field given by the arrays fx, fy, and fz or fx, fy respectively.

                  d               d               d
div F(x,y,z)  =   -- F(x,y,z)  +  -- F(x,y,z)  +  -- F(x,y,z)
                  dx              dy              dz

The coordinates of the vector field can be given by the arguments x, y, z or x, y respectively.

See also: curl, gradient, del2, dot.

: [cx, cy, cz, v] = curl (x, y, z, fx, fy, fz)
: [cz, v] = curl (x, y, fx, fy)
: […] = curl (fx, fy, fz)
: […] = curl (fx, fy)
: v = curl (…)

Calculate curl of vector field given by the arrays fx, fy, and fz or fx, fy respectively.

                  / d         d       d         d       d         d     \
curl F(x,y,z)  =  | -- Fz  -  -- Fy,  -- Fx  -  -- Fz,  -- Fy  -  -- Fx |
                  \ dy        dz      dz        dx      dx        dy    /

The coordinates of the vector field can be given by the arguments x, y, z or x, y respectively. v calculates the scalar component of the angular velocity vector in direction of the z-axis for two-dimensional input. For three-dimensional input the scalar rotation is calculated at each grid point in direction of the vector field at that point.

See also: divergence, gradient, del2, cross.

: L = del2 (M)
: L = del2 (M, h)
: L = del2 (M, dx, dy, …)

Calculate the discrete Laplace operator.

For a 2-dimensional matrix M this is defined as

      1    / d^2            d^2         \
L  = --- * | ---  M(x,y) +  ---  M(x,y) |
      4    \ dx^2           dy^2        /

For N-dimensional arrays the sum in parentheses is expanded to include second derivatives over the additional higher dimensions.

The spacing between evaluation points may be defined by h, which is a scalar defining the equidistant spacing in all dimensions. Alternatively, the spacing in each dimension may be defined separately by dx, dy, etc. A scalar spacing argument defines equidistant spacing, whereas a vector argument can be used to specify variable spacing. The length of the spacing vectors must match the respective dimension of M. The default spacing value is 1.

Dimensions with fewer than 3 data points are skipped. Boundary points are calculated from the linear extrapolation of interior points.

Example: Second derivative of 2*x^3

f = @(x) 2*x.^3;
dd = @(x) 12*x;
x = 1:6;
L = 4*del2 (f(x));
assert (L, dd (x));

See also: gradient, diff.

: factorial (n)

Return the factorial of n where n is a real non-negative integer.

If n is a scalar, this is equivalent to prod (1:n). For vector or matrix arguments, return the factorial of each element in the array.

For non-integers see the generalized factorial function gamma. Note that the factorial function grows large quite quickly, and even with double precision values overflow will occur if n > 171. For such cases consider gammaln.

See also: prod, gamma, gammaln.

: pf = factor (q)
: [pf, n] = factor (q)

Return the prime factorization of q.

The prime factorization is defined as prod (pf) == q where every element of pf is a prime number. If q == 1, return 1. The output pf is of the same numeric class as the input.

With two output arguments, return the unique prime factors pf and their multiplicities. That is, prod (pf .^ n) == q.

Implementation Note: The input q must be less than flintmax when the input is a floating-point class (double or single).

See also: gcd, lcm, isprime, primes.

: g = gcd (a1, a2, …)
: [g, v1, …] = gcd (a1, a2, …)

Compute the greatest common divisor of a1, a2, ….

All arguments must be the same size or scalar. For arrays, the greatest common divisor is calculated for each element individually. All elements must be ordinary or Gaussian (complex) integers. Note that for Gaussian integers, the gcd is only unique up to a phase factor (multiplication by 1, -1, i, or -i), so an arbitrary greatest common divisor among the four possible is returned.

Optional return arguments v1, …, contain integer vectors such that,

g = v1 .* a1 + v2 .* a2 + …

Example code:

gcd ([15, 9], [20, 18])
   ⇒  5  9

See also: lcm, factor, isprime.

: lcm (x, y)
: lcm (x, y, …)

Compute the least common multiple of x and y, or of the list of all arguments.

All elements must be numeric and of the same size or scalar.

See also: factor, gcd, isprime.

: rem (x, y)

Return the remainder of the division x / y.

The remainder is computed using the expression

x - y .* fix (x ./ y)

An error message is printed if the dimensions of the arguments do not agree, or if either argument is complex.

Programming Notes: When calculating with floating point numbers (double, single), values within a few eps of an integer will be rounded to that integer before computation for compatibility with MATLAB. Any floating point integers greater than flintmax (2^53 for double) will not compute correctly. For larger integer values convert the input to uint64 before calling this function.

By convention,

rem (x, 0) = NaN  if x is a floating point variable
rem (x, 0) = 0    if x is an integer variable
rem (x, y)  returns a value with the signbit from x

For the opposite conventions see the mod function. In general, rem is best when computing the remainder after division of two positive numbers. For negative numbers, or when the values are periodic, mod is a better choice.

See also: mod.

: mod (x, y)

Compute the modulo of x and y.

Conceptually this is given by

x - y .* floor (x ./ y)

and is written such that the correct modulus is returned for integer types. This function handles negative values correctly. That is, mod (-1, 3) is 2, not -1, as rem (-1, 3) returns.

An error results if the dimensions of the arguments do not agree, or if either of the arguments is complex.

Programming Notes: When calculating with floating point numbers (double, single), values within a few eps of an integer will be rounded to that integer before computation for compatibility with MATLAB. Any floating point integers greater than flintmax (2^53 for double) will not compute correctly. For larger integer values convert the input to uint64 before calling this function.

By convention,

mod (x, 0) = x
mod (x, y)      returns a value with the signbit from y

For the opposite conventions see the rem function. In general, mod is a better choice than rem when any of the inputs are negative numbers or when the values are periodic.

See also: rem.

: p = primes (n)

Return all primes up to n.

The output data class (double, single, uint32, etc.) is the same as the input class of n. The algorithm used is the Sieve of Eratosthenes.

Note: For a specific number n of primes, call list_primes (n). Alternatively, call primes (n*log (k*n))(1:n) where k is about 5 or 6. This works because the distance from one prime to the next is proportional to the logarithm of the prime, on average. On integrating, there are about n primes less than n * log (5*n).

See also: list_primes, isprime.

: list_primes ()
: list_primes (n)

List the first n primes.

If n is unspecified, the first 25 primes are listed.

See also: primes, isprime.

: sign (x)

Compute the signum function.

This is defined as

           -1, x < 0;
sign (x) =  0, x = 0;
            1, x > 0.

For complex arguments, sign returns x ./ abs (x).

Note that sign (-0.0) is 0. Although IEEE 754 floating point allows zero to be signed, 0.0 and -0.0 compare equal. If you must test whether zero is signed, use the signbit function.

See also: signbit.

: signbit (x)

Return logical true if the value of x has its sign bit set and false otherwise.

This behavior is consistent with the other logical functions. See Logical Values. The behavior differs from the C language function which returns nonzero if the sign bit is set.

This is not the same as x < 0.0, because IEEE 754 floating point allows zero to be signed. The comparison -0.0 < 0.0 is false, but signbit (-0.0) will return a nonzero value.

See also: sign.


Next: Special Functions, Previous: Sums and Products, Up: Arithmetic   [Contents][Index]